PCB Mount Normally Closed Normal Open Thermostat Thermal Switch KSD-01F Thermal Protector
Description of KSD-01F Thermostat
The product is a contact temperature-sensing snap-type plastic package thermostat, which adopts the international T0220/Y220 standard package. The product has the characteristics of high reliability, sensitivity and accuracy, small size, light weight, and very convenient installation. It is very suitable for PCB circuit boards/heat dissipation. Appliance/power device installation.
Technical Parameters of KSD-01F Thermal Switch
(1) Contact form: 1D (normally closed) or 1H (normally open)
(2) Contact load: 2A/250V AC/DC, 2A/120V AC/DC, 1A/250V AC/DC
(3) Action temperature: 0°C-130°C (optional 5 degrees for a specification). Allowable tolerance: ±3°C, ±5°C
(4) Reset temperature (difference from operating temperature): 8-35°C
(5) Ambient temperature: -55°C-+180°C
(6) Overheating temperature: 250°C/instant
(7) Insulation resistance: normal temperature and humidity ≥100MΩ
(8) Contact resistance: ≤50 mΩ
(9) Medium withstand voltage: ≥1500VAC
Q0) Weight: <2g
(I) Service life:> 10,000 times
Characteristics of KSD-01F Thermal Protector
The shell is insulated, and the volume is small and easy to install.
Sensitive action, no arc.
It is better suitable for the installation and welding of printed circuit boards under the conditions of high-speed automation equipment, which can save a lot of expensive labor costs.
The temperature is preset before leaving the factory for single temperature range control.
Resistant to water, salt water, alcohol, ammonia and most organic solvents.
Application of PCB Mount KSD-01F Thermal Switch
Printed circuit board
Power system
Computers and computer peripherals
Aircraft and other test instrumentation equipment
Size of Normally Closed Normal Open KSD-01F Thermal Protector
Temperature and Parameters of KSD-01F Thermostat
Action temperature and reset temperature table unit: °C (below room temperature)
| Action Temperature (士5) | High Reset Temperature | Higher than Action Temperature |
| 0 | 20 | 5 |
| 5 | 25 | 5 |
| 10 | 30 | 5 |
| 15 | 35 | 5 |
Action temperature and reset temperature table unit: °C (normal temperature)
| Action Temperature(士5) | Low Reset Temperature | Lower than Action Temperature |
| 40 | 20 | 5 |
| 45 | 25 | 5 |
| 50 | 30 | 5 |
| 55 | 30 | 5 |
| 60 | 35 | 5 |
| 65 | 40 | 5 |
| 70 | 45 | 6 |
| 75 | 45 | 6 |
| 80 | 50 | 6 |
| 85 | 55 | 6 |
| 90 | 60 | 6 |
| 95 | 60 | 6 |
| 100 | 65 | 7 |
| 105 | 70 | 7 |
| 110 | 75 | 7 |
| 115 | 75 | 8 |
| 120 | 80 | 8 |
| 125 | 85 | 9 |
| 130 | 90 | 9 |
Working Principle of Normally Closed KSD-01F Thermal Protector
KSD-01F temperature control switch adopts T0-220 package form, sudden jump type, single-pole/single-throw contact point of 100% conduction structure, when the external temperature is too high, it will be transferred to the corrected bimetallic strip Act quickly to cut off or connect the circuit (normally closed or normally open). When the temperature drops to the reset temperature, the bimetallic strip will quickly reset again, repeating the work to ensure the safety of the product temperature protection.
Contact Details:
Andy Wu
Email: andy@tianrui-fuse.com.cn
MP/Whatsapp: +86 13532772961
Wechat: HFeng0805
Skype: andywutechrich
QQ: 969828363
Product Tags:
|
|
PCB Mount Normally Closed Normal Open Thermostat Thermal Switch KSD-01F Thermal Protector Images
|
